Source

SCPI Command :

TRIGger<*>:CDR:EYE:SOURce

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(trigger=Trigger.Default) → HwAnalogSource[source]

# TRIGger<*>:CDR:EYE:SOURce
value: enums.HwAnalogSource = driver.trigger.cdr.eye.source.get(trigger = repcap.Trigger.Default)

Returns the channel signal that is used for clock recovery. You can set the source with method RsRtx.trigger.source.select.set() . The source cannot be changed if the serial pattern trigger is selected in the trigger setup and the CDR is enabled. In this case, the instrument triggers on the recovered clock, trigger source and CDR source are the same.

Parameters:: trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)
Returns:: analog_source: C1 | C2 | C3 | C4