Lowpass

SCPI Command :

TRIGger<*>:ANEDge:CUToff:LOWPass

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(trigger=Trigger.Default) → AnalogCutoff

# TRIGger<*>:ANEDge:CUToff:LOWPass
value: enums.AnalogCutoff = driver.trigger.anEdge.cutoff.lowpass.get(trigger = repcap.Trigger.Default)

Frequencies higher than the Cut-off frequency are rejected, lower frequencies pass the filter.

Parameters:

trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)

Returns:

analog_cutoff_lp: KHZ5 | KHZ50 | MHZ50

• KHZ5: 5 kHz

• KHZ50: 50 kHz

• MHZ50: 50 MHz

set(analog_cutoff_lp: AnalogCutoff, trigger=Trigger.Default) → None

# TRIGger<*>:ANEDge:CUToff:LOWPass
driver.trigger.anEdge.cutoff.lowpass.set(analog_cutoff_lp = enums.AnalogCutoff.KHZ5, trigger = repcap.Trigger.Default)

Frequencies higher than the Cut-off frequency are rejected, lower frequencies pass the filter.

Parameters:

• analog_cutoff_lp –

  KHZ5 | KHZ50 | MHZ50

  • KHZ5: 5 kHz

  • KHZ50: 50 kHz

  • MHZ50: 50 MHz

• trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)