Data

SCPI Command :

BUS<*>:CMSB:NRZ:DATA

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(bus=Bus.Default) → SignalSource

# BUS<*>:CMSB:NRZ:DATA
value: enums.SignalSource = driver.bus.cmsb.nrz.data.get(bus = repcap.Bus.Default)

Selects the source channel for the data signal in NRZ coding standards. For triggering on the serial bus when the NRZ clocked coding standard is selected, analog or digital channel sources are required. For triggering on the serial bus when the NRZ unclocked coding standard is selected, analog channel sources are required. Otherwise, if no serial bus trigger has been selected, permitted source selections include the mathematical channels and the reference channels.

Parameters:

bus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bus’)

Returns:

source_nrz_data: C1W1 | C2W1 | C3W1 | C4W1 | M1 | M2 | M3 | M4 | M5 | M6 | M7 | M8 | R1 | R2 | R3 | R4| D0 | D1 | D2 | D3 | D4 | D5 | D6 | D7 | D8 | D9 | D10 | D11 | D12 | D13 | D14 | D15

set(source_nrz_data: SignalSource, bus=Bus.Default) → None

# BUS<*>:CMSB:NRZ:DATA
driver.bus.cmsb.nrz.data.set(source_nrz_data = enums.SignalSource.AJ1, bus = repcap.Bus.Default)

Selects the source channel for the data signal in NRZ coding standards. For triggering on the serial bus when the NRZ clocked coding standard is selected, analog or digital channel sources are required. For triggering on the serial bus when the NRZ unclocked coding standard is selected, analog channel sources are required. Otherwise, if no serial bus trigger has been selected, permitted source selections include the mathematical channels and the reference channels.

Parameters:

• source_nrz_data – C1W1 | C2W1 | C3W1 | C4W1 | M1 | M2 | M3 | M4 | M5 | M6 | M7 | M8 | R1 | R2 | R3 | R4| D0 | D1 | D2 | D3 | D4 | D5 | D6 | D7 | D8 | D9 | D10 | D11 | D12 | D13 | D14 | D15

• bus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bus’)