Clck

SCPI Command :

BUS<*>:CMSB:NRZ:CLCK

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(bus=Bus.Default) → SignalSource

# BUS<*>:CMSB:NRZ:CLCK
value: enums.SignalSource = driver.bus.cmsb.nrz.clck.get(bus = repcap.Bus.Default)

Selects the source channel for the clock signal in the NRZ Clocked coding standard. For triggering on the serial bus when the NRZ clocked coding standard is selected, analog or digital channel sources are required. Otherwise, if no serial bus trigger has been selected, permitted source selections include the mathematical channels and the reference channels.

Parameters:

bus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bus’)

Returns:

source_nrz_clock: NONE | C1W1 | C2W1 | C3W1 | C4W1 | M1 | M2 | M3 | M4 | M5 | M6 | M7 | M8 | R1 | R2 | R3 | R4| D0 | D1 | D2 | D3 | D4 | D5 | D6 | D7 | D8 | D9 | D10 | D11 | D12 | D13 | D14 | D15

set(source_nrz_clock: SignalSource, bus=Bus.Default) → None

# BUS<*>:CMSB:NRZ:CLCK
driver.bus.cmsb.nrz.clck.set(source_nrz_clock = enums.SignalSource.AJ1, bus = repcap.Bus.Default)

Selects the source channel for the clock signal in the NRZ Clocked coding standard. For triggering on the serial bus when the NRZ clocked coding standard is selected, analog or digital channel sources are required. Otherwise, if no serial bus trigger has been selected, permitted source selections include the mathematical channels and the reference channels.

Parameters:

• source_nrz_clock – NONE | C1W1 | C2W1 | C3W1 | C4W1 | M1 | M2 | M3 | M4 | M5 | M6 | M7 | M8 | R1 | R2 | R3 | R4| D0 | D1 | D2 | D3 | D4 | D5 | D6 | D7 | D8 | D9 | D10 | D11 | D12 | D13 | D14 | D15

• bus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bus’)