Dmax

SCPI Command :

TRIGger<*>:USBPd:FRAMe<*>:FLD<*>:DMAX
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(trigger=Trigger.Default, busFrameNull=BusFrameNull.Default, busFieldNull=BusFieldNull.Default) → int[source]
# TRIGger<*>:USBPd:FRAMe<*>:FLD<*>:DMAX
value: int = driver.trigger.usbPd.frame.fld.dmax.get(trigger = repcap.Trigger.Default, busFrameNull = repcap.BusFrameNull.Default, busFieldNull = repcap.BusFieldNull.Default)

Sets the end value of a data pattern range if method RsRtx.trigger.usbPd.frame.fld.dmax.set() is set to INRange or OORange.

Parameters:

  • trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)

  • busFrameNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Frame’)

  • busFieldNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Fld’)

Returns:

data_max: Specifies the name of the generic trigger setting frame, see method RsRtx.bus.usbPd.result.frame.typePy.get().

set(data_max: int, trigger=Trigger.Default, busFrameNull=BusFrameNull.Default, busFieldNull=BusFieldNull.Default) → None[source]
# TRIGger<*>:USBPd:FRAMe<*>:FLD<*>:DMAX
driver.trigger.usbPd.frame.fld.dmax.set(data_max = 1, trigger = repcap.Trigger.Default, busFrameNull = repcap.BusFrameNull.Default, busFieldNull = repcap.BusFieldNull.Default)

Sets the end value of a data pattern range if method RsRtx.trigger.usbPd.frame.fld.dmax.set() is set to INRange or OORange.

Parameters:

  • data_max – Specifies the name of the generic trigger setting frame, see method RsRtx.bus.usbPd.result.frame.typePy.get().

  • trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)

  • busFrameNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Frame’)

  • busFieldNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Fld’)