TypePy

SCPI Command :

TRIGger<*>:UART:TYPE
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(trigger=Trigger.Default) → BusUartType[source]
# TRIGger<*>:UART:TYPE
value: enums.BusUartType = driver.trigger.uart.typePy.get(trigger = repcap.Trigger.Default)

Selects the trigger type for UART analysis.

Parameters:

trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)

Returns:

type_py: STBT: Start bit PCKS: Packet start DATA: Serial pattern PRER: Parity error BRKC: Break condition STPerror: Stop error

set(type_py: BusUartType, trigger=Trigger.Default) → None[source]
# TRIGger<*>:UART:TYPE
driver.trigger.uart.typePy.set(type_py = enums.BusUartType.BRKC, trigger = repcap.Trigger.Default)

Selects the trigger type for UART analysis.

Parameters:

  • type_py – STBT: Start bit PCKS: Packet start DATA: Serial pattern PRER: Parity error BRKC: Break condition STPerror: Stop error

  • trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)