Dmin

SCPI Command :

TRIGger<*>:TNOS:FRAMe<*>:FLD<*>:DMIN
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(trigger=Trigger.Default, busFrameNull=BusFrameNull.Default, busFieldNull=BusFieldNull.Default) → int[source]
# TRIGger<*>:TNOS:FRAMe<*>:FLD<*>:DMIN
value: int = driver.trigger.tnos.frame.fld.dmin.get(trigger = repcap.Trigger.Default, busFrameNull = repcap.BusFrameNull.Default, busFieldNull = repcap.BusFieldNull.Default)

Specifies the data pattern, or sets the start value of a data pattern range for the trigger.

Parameters:

  • trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)

  • busFrameNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Frame’)

  • busFieldNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Fld’)

Returns:

data_min: List of comma-separated values.

set(data_min: int, trigger=Trigger.Default, busFrameNull=BusFrameNull.Default, busFieldNull=BusFieldNull.Default) → None[source]
# TRIGger<*>:TNOS:FRAMe<*>:FLD<*>:DMIN
driver.trigger.tnos.frame.fld.dmin.set(data_min = 1, trigger = repcap.Trigger.Default, busFrameNull = repcap.BusFrameNull.Default, busFieldNull = repcap.BusFieldNull.Default)

Specifies the data pattern, or sets the start value of a data pattern range for the trigger.

Parameters:

  • data_min – List of comma-separated values.

  • trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)

  • busFrameNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Frame’)

  • busFieldNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Fld’)