NbRte

SCPI Command :

TRIGger<*>:SERPattern:PRBS:NBRTe

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(trigger=Trigger.Default) → float[source]

# TRIGger<*>:SERPattern:PRBS:NBRTe
value: float = driver.trigger.serPattern.prbs.nbRte.get(trigger = repcap.Trigger.Default)

Sets the nominal bit rate for the PRBS sequence. It corresponds to the data rate of the data stream from which the clock is to be recovered.

Parameters:: trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)
Returns:: prbs_nom_bit_rate: 200E+3 to 2.5E+9

set(prbs_nom_bit_rate: float, trigger=Trigger.Default) → None[source]

# TRIGger<*>:SERPattern:PRBS:NBRTe
driver.trigger.serPattern.prbs.nbRte.set(prbs_nom_bit_rate = 1.0, trigger = repcap.Trigger.Default)

Sets the nominal bit rate for the PRBS sequence. It corresponds to the data rate of the data stream from which the clock is to be recovered.

Parameters:

prbs_nom_bit_rate – 200E+3 to 2.5E+9
trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)