Pcondition

SCPI Command :

TRIGger<*>:SERPattern:COMPlex:PATTern<*>:PCONdition
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(trigger=Trigger.Default, triggerPattern=TriggerPattern.Default) → ConditionOperator[source]
# TRIGger<*>:SERPattern:COMPlex:PATTern<*>:PCONdition
value: enums.ConditionOperator = driver.trigger.serPattern.complex.pattern.pcondition.get(trigger = repcap.Trigger.Default, triggerPattern = repcap.TriggerPattern.Default)

Sets the operator to define the exact position or range where the instrument looks for the specified pattern.

Parameters:

  • trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)

  • triggerPattern – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Pattern’)

Returns:

operator: EQUal | NEQual | LTHan | LETHan | GTHan | GETHan | INRange | OORange

  • EQUal | NEQual | LTHan | LETHan | GTHan | GETHan: Equal, Not equal, Less than, Less or equal than, Greater Than, Greater or equal than. These operators require one identifier pattern to be set with TRIGgert:SERPattern:COMPlex:PATTernn:FRPTtern

  • INRange | OORange: In range / Out of range: Set the minimum and maximum value of the range with TRIGgert:SERPattern:COMPlex:PATTernn:FRPTtern and TRIGgert:SERPattern:COMPlex:PATTernn:TOPTtern.

set(operator: ConditionOperator, trigger=Trigger.Default, triggerPattern=TriggerPattern.Default) → None[source]
# TRIGger<*>:SERPattern:COMPlex:PATTern<*>:PCONdition
driver.trigger.serPattern.complex.pattern.pcondition.set(operator = enums.ConditionOperator.EQUal, trigger = repcap.Trigger.Default, triggerPattern = repcap.TriggerPattern.Default)

Sets the operator to define the exact position or range where the instrument looks for the specified pattern.

Parameters:

  • operator –

    EQUal | NEQual | LTHan | LETHan | GTHan | GETHan | INRange | OORange

    • EQUal | NEQual | LTHan | LETHan | GTHan | GETHan: Equal, Not equal, Less than, Less or equal than, Greater Than, Greater or equal than. These operators require one identifier pattern to be set with TRIGgert:SERPattern:COMPlex:PATTernn:FRPTtern

    • INRange | OORange: In range / Out of range: Set the minimum and maximum value of the range with TRIGgert:SERPattern:COMPlex:PATTernn:FRPTtern and TRIGgert:SERPattern:COMPlex:PATTernn:TOPTtern.

  • trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)

  • triggerPattern – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Pattern’)