Range

SCPI Command :

TRIGger<*>:RUNT:RANGe

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(trigger=Trigger.Default) → RuntMode

# TRIGger<*>:RUNT:RANGe
value: enums.RuntMode = driver.trigger.runt.range.get(trigger = repcap.Trigger.Default)

Defines the time limit of the runt pulse in relation to the method RsRtx.trigger.runt.width.set() and method RsRtx.trigger.runt.delta.set() settings.

Parameters:

trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)

Returns:

mode: ANY | LONGer | SHORter | WITHin | OUTSide

• ANY: Triggers on all runts fulfilling the level condition, without time limitation.

• LONGer: Triggers on runts longer than the given Runt width.

• SHORter: Triggers on runts shorter than the given Runt width.

• WITHin: Triggers if the runt length is inside a given time range. The range is defined by Runt width and ±Delta.

• OUTSide: Triggers if the runt length is outside a given time range. The range is defined by Runt width and ±Delta.

set(mode: RuntMode, trigger=Trigger.Default) → None

# TRIGger<*>:RUNT:RANGe
driver.trigger.runt.range.set(mode = enums.RuntMode.ANY, trigger = repcap.Trigger.Default)

Defines the time limit of the runt pulse in relation to the method RsRtx.trigger.runt.width.set() and method RsRtx.trigger.runt.delta.set() settings.

Parameters:

• mode –

  ANY | LONGer | SHORter | WITHin | OUTSide

  • ANY: Triggers on all runts fulfilling the level condition, without time limitation.

  • LONGer: Triggers on runts longer than the given Runt width.

  • SHORter: Triggers on runts shorter than the given Runt width.

  • WITHin: Triggers if the runt length is inside a given time range. The range is defined by Runt width and ±Delta.

  • OUTSide: Triggers if the runt length is outside a given time range. The range is defined by Runt width and ±Delta.

• trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)