Range

SCPI Command :

TRIGger<*>:PATTern:WIDTh:RANGe
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(trigger=Trigger.Default) → TriggerSearchRangeMode[source]
# TRIGger<*>:PATTern:WIDTh:RANGe
value: enums.TriggerSearchRangeMode = driver.trigger.pattern.width.range.get(trigger = repcap.Trigger.Default)

Defines how the range of a pulse width is defined for keeping up the true result of the pattern condition. The width and delta are specified using method RsRtx.trigger.pattern.width.width.set() and method RsRtx.trigger.pattern.width.delta.set() , respectively.

Parameters:

trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)

Returns:

width_range_mode: WITHin | OUTSide | SHORter | LONGer

  • WITHin: Triggers on pulses inside a given range. The range is defined by the width ±delta.

  • OUTSide: Triggers on pulses outside a given range. The range is defined by the width ±delta.

  • SHORter: Triggers on pulses shorter than the given width.

  • LONGer: Triggers on pulses longer than the given width.

set(width_range_mode: TriggerSearchRangeMode, trigger=Trigger.Default) → None[source]
# TRIGger<*>:PATTern:WIDTh:RANGe
driver.trigger.pattern.width.range.set(width_range_mode = enums.TriggerSearchRangeMode.LONGer, trigger = repcap.Trigger.Default)

Defines how the range of a pulse width is defined for keeping up the true result of the pattern condition. The width and delta are specified using method RsRtx.trigger.pattern.width.width.set() and method RsRtx.trigger.pattern.width.delta.set() , respectively.

Parameters:

  • width_range_mode –

    WITHin | OUTSide | SHORter | LONGer

    • WITHin: Triggers on pulses inside a given range. The range is defined by the width ±delta.

    • OUTSide: Triggers on pulses outside a given range. The range is defined by the width ±delta.

    • SHORter: Triggers on pulses shorter than the given width.

    • LONGer: Triggers on pulses longer than the given width.

  • trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)