Range

SCPI Command :

TRIGger<*>:PARallel:TIMeout:RANGe

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(trigger=Trigger.Default) → TimeoutRange

# TRIGger<*>:PARallel:TIMeout:RANGe
value: enums.TimeoutRange = driver.trigger.parallel.timeout.range.get(trigger = repcap.Trigger.Default)

Sets the state condition.

Parameters:

trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)

Returns:

timeout_mode: HIGH | LOW | EITHer

• HIGH: The level of a digital channel stays above the threshold, or the logical expression for LOGic trigger source is true.

• LOW: The level of a digital channel stays below the threshold, or the logical expression for LOGic trigger source is false.

• EITHer: The signal state remains unchanged.

set(timeout_mode: TimeoutRange, trigger=Trigger.Default) → None

# TRIGger<*>:PARallel:TIMeout:RANGe
driver.trigger.parallel.timeout.range.set(timeout_mode = enums.TimeoutRange.EITHer, trigger = repcap.Trigger.Default)

Sets the state condition.

Parameters:

• timeout_mode –

  HIGH | LOW | EITHer

  • HIGH: The level of a digital channel stays above the threshold, or the logical expression for LOGic trigger source is true.

  • LOW: The level of a digital channel stays below the threshold, or the logical expression for LOGic trigger source is false.

  • EITHer: The signal state remains unchanged.

• trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)