Htime

SCPI Command :

TRIGger<*>:PARallel:SETHold:HTIMe

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(trigger=Trigger.Default) → float[source]

# TRIGger<*>:PARallel:SETHold:HTIMe
value: float = driver.trigger.parallel.setHold.htime.get(trigger = repcap.Trigger.Default)

Sets the minimum time after the clock edge while data should be stable and not change its state.

Parameters:: trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)
Returns:: hold_time: -99.8E-9 to 100E-9

set(hold_time: float, trigger=Trigger.Default) → None[source]

# TRIGger<*>:PARallel:SETHold:HTIMe
driver.trigger.parallel.setHold.htime.set(hold_time = 1.0, trigger = repcap.Trigger.Default)

Sets the minimum time after the clock edge while data should be stable and not change its state.

Parameters:

hold_time – -99.8E-9 to 100E-9
trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)