Bit<BitNull>

SCPI Command :

TRIGger<*>:PARallel:PATTern:BIT<*>
Commands in total: 1
Subgroups: 0
Direct child commands: 1

Repeated Capability Setting:

# Range: Nr0 .. Nr15

driver.trigger.parallel.pattern.bit.repcap_bitNull_set(repcap.BitNull.Nr0)
get(trigger=Trigger.Default, bitNull=BitNull.Default) → TriggerParallelBit[source]
# TRIGger<*>:PARallel:PATTern:BIT<*>
value: enums.TriggerParallelBit = driver.trigger.parallel.pattern.bit.get(trigger = repcap.Trigger.Default, bitNull = repcap.BitNull.Default)

Sets the required state for each digital channel that is used in the bus.

Parameters:

  • trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)

  • bitNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Bit’)

Returns:

bit: Bit value: 1 (HIGH) , 0 (LOW) , or X (DONTCARE = DONTcare)

set(bit: TriggerParallelBit, trigger=Trigger.Default, bitNull=BitNull.Default) → None[source]
# TRIGger<*>:PARallel:PATTern:BIT<*>
driver.trigger.parallel.pattern.bit.set(bit = enums.TriggerParallelBit.DONTCARE, trigger = repcap.Trigger.Default, bitNull = repcap.BitNull.Default)

Sets the required state for each digital channel that is used in the bus.

Parameters:

  • bit – Bit value: 1 (HIGH) , 0 (LOW) , or X (DONTCARE = DONTcare)

  • trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)

  • bitNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Bit’)

Cloning the Group

# Create a copy of the original group, that exists independently
bit_copy = driver.trigger.parallel.pattern.bit.clone()