Delay

SCPI Command :

TRIGger<*>:OUT:DELay

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(trigger=Trigger.Default) → float[source]

# TRIGger<*>:OUT:DELay
value: float = driver.trigger.out.delay.get(trigger = repcap.Trigger.Default)

Sets the delay of the first pulse edge to the trigger point. The setting is not available if a mask test or measurement is running and the on-violation event is set to trigger out pulse.

Parameters:: trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)
Returns:: delay: 1.8E-6 to 512E-3

set(delay: float, trigger=Trigger.Default) → None[source]

# TRIGger<*>:OUT:DELay
driver.trigger.out.delay.set(delay = 1.0, trigger = repcap.Trigger.Default)

Sets the delay of the first pulse edge to the trigger point. The setting is not available if a mask test or measurement is running and the on-violation event is set to trigger out pulse.

Parameters:

delay – 1.8E-6 to 512E-3
trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)