Bitrate

SCPI Command :

TRIGger<*>:NFC:BITRate

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(trigger=Trigger.Default) → TriggerNfcBitrate

# TRIGger<*>:NFC:BITRate
value: enums.TriggerNfcBitrate = driver.trigger.nfc.bitrate.get(trigger = repcap.Trigger.Default)

Sets the bit rate of the signal. For NFC-A and NFC-B, the bit rate is always 106 kBit per second. For NFC-F, the bit rate can be either 212 or 424 kBit per second.

Parameters:

trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)

Returns:

bitrate: KBPS106 | KBPS212 | KBPS424

set(bitrate: TriggerNfcBitrate, trigger=Trigger.Default) → None

# TRIGger<*>:NFC:BITRate
driver.trigger.nfc.bitrate.set(bitrate = enums.TriggerNfcBitrate.KBPS106, trigger = repcap.Trigger.Default)

Sets the bit rate of the signal. For NFC-A and NFC-B, the bit rate is always 106 kBit per second. For NFC-F, the bit rate can be either 212 or 424 kBit per second.

Parameters:

• bitrate – KBPS106 | KBPS212 | KBPS424

• trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)