FrameType

SCPI Command :

TRIGger<*>:MDIO:FRAMetype

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(trigger=Trigger.Default) → MdioFrameType

# TRIGger<*>:MDIO:FRAMetype
value: enums.MdioFrameType = driver.trigger.mdio.frameType.get(trigger = repcap.Trigger.Default)

Selects the Type of Frame code (or OP code, OpCode, operation code) ; available only in trigger type Data. Note that the same OpCode may have different meanings in Clause 22 and Clause 45.

Parameters:

trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)

Returns:

frame_type: OP00 | OP01 | OP10 | OP11 | OPXX

• OP00: Address frame (in Clause 45, only)

• OP01: Write frame (in Clause 22 or Clause 45)

• OP10: Read frame (in Clause 22) or Post-Read increment address frame (in Clause 45)

• OP11: Read frame (in Clause 45)

• OPXX: Any frame type

set(frame_type: MdioFrameType, trigger=Trigger.Default) → None

# TRIGger<*>:MDIO:FRAMetype
driver.trigger.mdio.frameType.set(frame_type = enums.MdioFrameType.OP00, trigger = repcap.Trigger.Default)

Selects the Type of Frame code (or OP code, OpCode, operation code) ; available only in trigger type Data. Note that the same OpCode may have different meanings in Clause 22 and Clause 45.

Parameters:

• frame_type –

  OP00 | OP01 | OP10 | OP11 | OPXX

  • OP00: Address frame (in Clause 45, only)

  • OP01: Write frame (in Clause 22 or Clause 45)

  • OP10: Read frame (in Clause 22) or Post-Read increment address frame (in Clause 45)

  • OP11: Read frame (in Clause 45)

  • OPXX: Any frame type

• trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)