Upper

SCPI Command :

TRIGger<*>:LEVel<*>:SLEW:UPPer
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(trigger=Trigger.Default, triggerLevel=TriggerLevel.Default) → float[source]
# TRIGger<*>:LEVel<*>:SLEW:UPPer
value: float = driver.trigger.level.slew.upper.get(trigger = repcap.Trigger.Default, triggerLevel = repcap.TriggerLevel.Default)

Set the lower and upper voltage thresholds. When the signal crosses a level, the slew rate measurement starts or stops depending on the selected slope.

Parameters:

  • trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)

  • triggerLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Level’)

set(transi_upp_lev: float, trigger=Trigger.Default, triggerLevel=TriggerLevel.Default) → None[source]
# TRIGger<*>:LEVel<*>:SLEW:UPPer
driver.trigger.level.slew.upper.set(transi_upp_lev = 1.0, trigger = repcap.Trigger.Default, triggerLevel = repcap.TriggerLevel.Default)

Set the lower and upper voltage thresholds. When the signal crosses a level, the slew rate measurement starts or stops depending on the selected slope.

Parameters:

  • transi_upp_lev – -10 to 10

  • trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)

  • triggerLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Level’)