PerDivision

SCPI Command :

TRIGger<*>:LEVel<*>:NOISe:PERDivision
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(trigger=Trigger.Default, triggerLevel=TriggerLevel.Default) → float[source]
# TRIGger<*>:LEVel<*>:NOISe:PERDivision
value: float = driver.trigger.level.noise.perDivision.get(trigger = repcap.Trigger.Default, triggerLevel = repcap.TriggerLevel.Default)

Defines a range in divisions around the trigger level. If the signal oscillates inside this range and crosses the trigger level thereby, no trigger event occurs.

Parameters:

  • trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)

  • triggerLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Level’)

Returns:

hyst_in_divs: Hysteresis size in divisions

set(hyst_in_divs: float, trigger=Trigger.Default, triggerLevel=TriggerLevel.Default) → None[source]
# TRIGger<*>:LEVel<*>:NOISe:PERDivision
driver.trigger.level.noise.perDivision.set(hyst_in_divs = 1.0, trigger = repcap.Trigger.Default, triggerLevel = repcap.TriggerLevel.Default)

Defines a range in divisions around the trigger level. If the signal oscillates inside this range and crosses the trigger level thereby, no trigger event occurs.

Parameters:

  • hyst_in_divs – Hysteresis size in divisions

  • trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)

  • triggerLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Level’)