Dcondition

SCPI Command :

TRIGger<*>:HBTO:DATA:DCONdition
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(trigger=Trigger.Default) → ConditionOperator[source]
# TRIGger<*>:HBTO:DATA:DCONdition
value: enums.ConditionOperator = driver.trigger.hbto.data.dcondition.get(trigger = repcap.Trigger.Default)

Sets the condition for the data. You can define an exact value or a value range.

Parameters:

trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)

Returns:

data_operator: EQUal | NEQual | LTHan | LETHan | GTHan | GETHan | INRange | OORange

  • EQUal | NEQual | LTHan | LETHan | GTHan | GETHan: Equal, Not equal, Less than, Less or equal than, Greater Than, Greater or equal than. These conditions require one data pattern to be set with the corresponding TRIGgert:HBTO:DATA:DMIN command.

  • INRange | OORange: In range/Out of range: set the minimum and maximum value of the range with TRIGgert:HBTO:DATA:DMIN and TRIGgert:HBTO:DATA:DMAX.

set(data_operator: ConditionOperator, trigger=Trigger.Default) → None[source]
# TRIGger<*>:HBTO:DATA:DCONdition
driver.trigger.hbto.data.dcondition.set(data_operator = enums.ConditionOperator.EQUal, trigger = repcap.Trigger.Default)

Sets the condition for the data. You can define an exact value or a value range.

Parameters:

  • data_operator –

    EQUal | NEQual | LTHan | LETHan | GTHan | GETHan | INRange | OORange

    • EQUal | NEQual | LTHan | LETHan | GTHan | GETHan: Equal, Not equal, Less than, Less or equal than, Greater Than, Greater or equal than. These conditions require one data pattern to be set with the corresponding TRIGgert:HBTO:DATA:DMIN command.

    • INRange | OORange: In range/Out of range: set the minimum and maximum value of the range with TRIGgert:HBTO:DATA:DMIN and TRIGgert:HBTO:DATA:DMAX.

  • trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)