Dmax

SCPI Command :

TRIGger<*>:CANXl:FRAMe<*>:FLD<*>:DMAX

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(trigger=Trigger.Default, busFrameNull=BusFrameNull.Default, busFieldNull=BusFieldNull.Default) → int

# TRIGger<*>:CANXl:FRAMe<*>:FLD<*>:DMAX
value: int = driver.trigger.canXl.frame.fld.dmax.get(trigger = repcap.Trigger.Default, busFrameNull = repcap.BusFrameNull.Default, busFieldNull = repcap.BusFieldNull.Default)

Sets the end value of a data pattern range for the trigger, if the operator is set to INRange or OORANGe. You can set the operator with method RsRtx.trigger.canXl.frame.fld.doperator.set() .

Parameters:

• trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)

• busFrameNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Frame’)

• busFieldNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Fld’)

set(data_max: int, trigger=Trigger.Default, busFrameNull=BusFrameNull.Default, busFieldNull=BusFieldNull.Default) → None

# TRIGger<*>:CANXl:FRAMe<*>:FLD<*>:DMAX
driver.trigger.canXl.frame.fld.dmax.set(data_max = 1, trigger = repcap.Trigger.Default, busFrameNull = repcap.BusFrameNull.Default, busFieldNull = repcap.BusFieldNull.Default)

Sets the end value of a data pattern range for the trigger, if the operator is set to INRange or OORANGe. You can set the operator with method RsRtx.trigger.canXl.frame.fld.doperator.set() .

Parameters:

• trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)

• busFrameNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Frame’)

• busFieldNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Fld’)