Totube

SCPI Command :

REFLevel<*>:ABSolute:TOTube

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(refLevel=RefLevel.Default) → float

# REFLevel<*>:ABSolute:TOTube
value: float = driver.refLevel.absolute.totube.get(refLevel = repcap.RefLevel.Default)

Defines an area above the high signal level which is still considered to be high level.

Parameters:

refLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefLevel’)

set(value: float, refLevel=RefLevel.Default) → None

# REFLevel<*>:ABSolute:TOTube
driver.refLevel.absolute.totube.set(value = 1.0, refLevel = repcap.RefLevel.Default)

Defines an area above the high signal level which is still considered to be high level.

Parameters:

refLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefLevel’)