Source

SCPI Command :

BUS<*>:CAN:DATA:SOURce
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(bus=Bus.Default) → SignalSource[source]
# BUS<*>:CAN:DATA:SOURce
value: enums.SignalSource = driver.bus.can.data.source.get(bus = repcap.Bus.Default)

Sets the source of the data line that is selected with method RsRtx.bus.can.typePy.set() . Usually, the source is one of the analog channels. Reference and math waveforms are available as source if the trigger source is one of the analog channels but not the serial bus.

Parameters:

bus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bus’)

Returns:

data_source: C1W1 | C2W1 | C3W1 | C4W1 | M1 | M2 | M3 | M4 | M5 | M6 | M7 | M8 | R1 | R2 | R3 | R4 | D0 | D1 | D2 | D3 | D4 | D5 | D6 | D7 | D8 | D9 | D10 | D11 | D12 | D13 | D14 | D15

set(data_source: SignalSource, bus=Bus.Default) → None[source]
# BUS<*>:CAN:DATA:SOURce
driver.bus.can.data.source.set(data_source = enums.SignalSource.AJ1, bus = repcap.Bus.Default)

Sets the source of the data line that is selected with method RsRtx.bus.can.typePy.set() . Usually, the source is one of the analog channels. Reference and math waveforms are available as source if the trigger source is one of the analog channels but not the serial bus.

Parameters:

  • data_source – C1W1 | C2W1 | C3W1 | C4W1 | M1 | M2 | M3 | M4 | M5 | M6 | M7 | M8 | R1 | R2 | R3 | R4 | D0 | D1 | D2 | D3 | D4 | D5 | D6 | D7 | D8 | D9 | D10 | D11 | D12 | D13 | D14 | D15

  • bus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bus’)