Technology

SCPI Command :

BUS<*>:CAN:TECHnology
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(bus=Bus.Default) → BusCanTechnology[source]
# BUS<*>:CAN:TECHnology
value: enums.BusCanTechnology = driver.bus.can.technology.get(bus = repcap.Bus.Default)

Sets the threshold voltage as defined for various signal technologies.

Parameters:

bus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bus’)

Returns:

technology: V25 | V3 | V2 | V0 | MANual

  • V25: 2.5 Volt (CMOS 5.0 V)

  • V3: 3.0 Volt (CAN_H HS / CAN_L LS)

  • V2: 2.0 Volt (CAN_L HS / CAN_H LS)

  • V0: Ground

  • MANual: Manual setting of user-defined values with BUSb:CAN:DATA:THReshold.

set(technology: BusCanTechnology, bus=Bus.Default) → None[source]
# BUS<*>:CAN:TECHnology
driver.bus.can.technology.set(technology = enums.BusCanTechnology.CUSTom, bus = repcap.Bus.Default)

Sets the threshold voltage as defined for various signal technologies.

Parameters:

  • technology –

    V25 | V3 | V2 | V0 | MANual

    • V25: 2.5 Volt (CMOS 5.0 V)

    • V3: 3.0 Volt (CAN_H HS / CAN_L LS)

    • V2: 2.0 Volt (CAN_L HS / CAN_H LS)

    • V0: Ground

    • MANual: Manual setting of user-defined values with BUSb:CAN:DATA:THReshold.

  • bus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bus’)