Display

SCPI Command :

SYSTem:DISPlay:UPDate

Commands in total: 3

Subgroups: 1

Direct child commands: 1

get_update() → bool

# SYSTem:DISPlay:UPDate
value: bool = driver.system.display.get_update()

Defines whether the display is updated while the instrument is in the remote state. If the display is switched off, the normal GUI is replaced by a static image while the instrument is in the remote state. Switching off the display can speed up the measurement. This is the recommended state.

set_update(update: bool) → None

# SYSTem:DISPlay:UPDate
driver.system.display.set_update(update = False)

Defines whether the display is updated while the instrument is in the remote state. If the display is switched off, the normal GUI is replaced by a static image while the instrument is in the remote state. Switching off the display can speed up the measurement. This is the recommended state.

Parameters:

update – ON | 1: Display is shown and updated during remote control OFF | 0: Display shows static image during remote control

Cloning the Group

# Create a copy of the original group, that exists independently
display_copy = driver.system.display.clone()

Subgroups

• Message