SymbolRate

SCPI Command :

SIGNalconfig:SETup:SETTing<*>:SYMBolrate

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(setupSetting=SetupSetting.Default) → float

# SIGNalconfig:SETup:SETTing<*>:SYMBolrate
value: float = driver.signalConfig.setup.setting.symbolRate.get(setupSetting = repcap.SetupSetting.Default)

Sets/ displays the symbol rate. Most standards have a pre-dfeind symbol rate, see Table ‘Technology and serial standard properties’.

Parameters:

setupSetting – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Setting’)

Returns:

symbol_rate: 100 to 40E+9

set(symbol_rate: float, setupSetting=SetupSetting.Default) → None

# SIGNalconfig:SETup:SETTing<*>:SYMBolrate
driver.signalConfig.setup.setting.symbolRate.set(symbol_rate = 1.0, setupSetting = repcap.SetupSetting.Default)

Sets/ displays the symbol rate. Most standards have a pre-dfeind symbol rate, see Table ‘Technology and serial standard properties’.

Parameters:

• symbol_rate – 100 to 40E+9

• setupSetting – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Setting’)