PmtOffset

SCPI Command :

PROBe<*>:SETup:ADVanced:PMToffset
Commands in total: 1
Subgroups: 0
Direct child commands: 1
set(probe=Probe.Default, opc_timeout_ms: int = -1) → None[source]
# PROBe<*>:SETup:ADVanced:PMToffset
driver.probe.setup.advanced.pmtOffset.set(probe = repcap.Probe.Default)

Sets the measured R&S ProbeMeter value as offset. Make sure that the R&S ProbeMeter is active before you use this command. Available for power rail probes R&S RT-ZPR and optical isolated probes R&S RT-ZISO.

Parameters:

  • probe – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Probe’)

  • opc_timeout_ms – Maximum time to wait in milliseconds, valid only for this call.