UglLimit

SCPI Command :

LANE<*>:EQUalization:TRAining:DFE:TAPS:UGLLimit

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(lane=Lane.Default) → bool[source]

# LANE<*>:EQUalization:TRAining:DFE:TAPS:UGLLimit
value: bool = driver.lane.equalization.training.dfe.taps.uglLimit.get(lane = repcap.Lane.Default)

If enabled, you can define the same lower limit (LANE<m>:EQUalization:TRAining:DFE:TAPS:LLIMit<n>) and upper limit (LANE<m>:EQUalization:TRAining:DFE:TAPS:ULIMit<n>) for all taps. Else, you can define separate values for each tap.

Parameters:: lane – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Lane’)
Returns:: use_global_lims_dfe: OFF | ON

set(use_global_lims_dfe: bool, lane=Lane.Default) → None[source]

# LANE<*>:EQUalization:TRAining:DFE:TAPS:UGLLimit
driver.lane.equalization.training.dfe.taps.uglLimit.set(use_global_lims_dfe = False, lane = repcap.Lane.Default)

If enabled, you can define the same lower limit (LANE<m>:EQUalization:TRAining:DFE:TAPS:LLIMit<n>) and upper limit (LANE<m>:EQUalization:TRAining:DFE:TAPS:ULIMit<n>) for all taps. Else, you can define separate values for each tap.

Parameters:

use_global_lims_dfe – OFF | ON
lane – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Lane’)