Ulimit

SCPI Command :

LANE<*>:EQUalization:TRAining:DFE:LIMits:TAP<*>:ULIMit
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(lane=Lane.Default, laneEqTap=LaneEqTap.Default) → float[source]
# LANE<*>:EQUalization:TRAining:DFE:LIMits:TAP<*>:ULIMit
value: float = driver.lane.equalization.training.dfe.limits.tap.ulimit.get(lane = repcap.Lane.Default, laneEqTap = repcap.LaneEqTap.Default)

Sets the upper limit for the respective tap of the DFE filter. The trained/generated filter tap values are within these given limits.

Parameters:

  • lane – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Lane’)

  • laneEqTap – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Tap’)

Returns:

upper_limit: -1 to 1

set(upper_limit: float, lane=Lane.Default, laneEqTap=LaneEqTap.Default) → None[source]
# LANE<*>:EQUalization:TRAining:DFE:LIMits:TAP<*>:ULIMit
driver.lane.equalization.training.dfe.limits.tap.ulimit.set(upper_limit = 1.0, lane = repcap.Lane.Default, laneEqTap = repcap.LaneEqTap.Default)

Sets the upper limit for the respective tap of the DFE filter. The trained/generated filter tap values are within these given limits.

Parameters:

  • upper_limit – -1 to 1

  • lane – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Lane’)

  • laneEqTap – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Tap’)