Lselect

SCPI Command :

EYE<*>:QUALify:SIGNal:LSELect

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(eye=Eye.Default) → ReferenceLevelMode[source]

# EYE<*>:QUALify:SIGNal:LSELect
value: enums.ReferenceLevelMode = driver.eye.qualify.signal.lselect.get(eye = repcap.Eye.Default)

Selects the threshold. You can use the lower, middle, or upper reference level. These levels are the reference levels that are defined for measurements.

Parameters:: eye – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Eye’)
Returns:: level_selection: UPPer | MIDDle | LOWer

set(level_selection: ReferenceLevelMode, eye=Eye.Default) → None[source]

# EYE<*>:QUALify:SIGNal:LSELect
driver.eye.qualify.signal.lselect.set(level_selection = enums.ReferenceLevelMode.LOWer, eye = repcap.Eye.Default)

Selects the threshold. You can use the lower, middle, or upper reference level. These levels are the reference levels that are defined for measurements.

Parameters:

level_selection – UPPer | MIDDle | LOWer
eye – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Eye’)