Value

SCPI Command :

CHANnel<*>:EFRontend:FREQuency:REFerence[:VALue]
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(channel=Channel.Default) → float[source]
# CHANnel<*>:EFRontend:FREQuency:REFerence[:VALue]
value: float = driver.channel.efrontend.frequency.reference.value.get(channel = repcap.Channel.Default)

Sets the reference frequency that is used for frequency conversion on the external frontend. The external frontend needs an external reference frequency to generate its own LO frequency if no external LO is available. You can query supported values with method RsRtx.channel.efrontend.frequency.reference.listPy.get() .

Parameters:

channel – optional repeated capability selector. Default value: Ch1 (settable in the interface ‘Channel’)

set(ref_frequency: float, channel=Channel.Default) → None[source]
# CHANnel<*>:EFRontend:FREQuency:REFerence[:VALue]
driver.channel.efrontend.frequency.reference.value.set(ref_frequency = 1.0, channel = repcap.Channel.Default)

Sets the reference frequency that is used for frequency conversion on the external frontend. The external frontend needs an external reference frequency to generate its own LO frequency if no external LO is available. You can query supported values with method RsRtx.channel.efrontend.frequency.reference.listPy.get() .

Parameters:

  • ref_frequency – 10E+6 (coupled LO and coupled reference setup) , 10E+6 | 640E+6 | 1E+9 (advanced setup)

  • channel – optional repeated capability selector. Default value: Ch1 (settable in the interface ‘Channel’)