State

SCPI Command :

CHANnel<*>:EFRontend:FREQuency:LOSCillator:OUTPut:STATe

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(channel=Channel.Default) → bool

# CHANnel<*>:EFRontend:FREQuency:LOSCillator:OUTPut:STATe
value: bool = driver.channel.efrontend.frequency.loscillator.output.state.get(channel = repcap.Channel.Default)

For measurement setups Coupled LO and Coupled Ref, the command queries the connection state of the LO output. The state is defined by the selected setup definition. In Advanced measurement setup, set the LO output state according to the connection of the local oscillator in your setup. See also: method RsRtx.efrontend.setup() .

Parameters:

channel – optional repeated capability selector. Default value: Ch1 (settable in the interface ‘Channel’)

set(lo_output_state: bool, channel=Channel.Default) → None

# CHANnel<*>:EFRontend:FREQuency:LOSCillator:OUTPut:STATe
driver.channel.efrontend.frequency.loscillator.output.state.set(lo_output_state = False, channel = repcap.Channel.Default)

For measurement setups Coupled LO and Coupled Ref, the command queries the connection state of the LO output. The state is defined by the selected setup definition. In Advanced measurement setup, set the LO output state according to the connection of the local oscillator in your setup. See also: method RsRtx.efrontend.setup() .

Parameters:

• lo_output_state –

  OFF | ON

  • ON: The LO output of the selected frontend is connected to the LO input of another frontend.

  • OFF: The LO output is not connected.

• channel – optional repeated capability selector. Default value: Ch1 (settable in the interface ‘Channel’)