Rdif

SCPI Command :

BUS<*>:TBTO:RDIF

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(bus=Bus.Default) → SignalSource[source]

# BUS<*>:TBTO:RDIF
value: enums.SignalSource = driver.bus.tbto.rdif.get(bus = repcap.Bus.Default)

Sets the source of the provided reversed differential signal, if method RsRtx.bus.tbto.rtyp.set() is set to DIFFerential.

Parameters:: bus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bus’)
Returns:: src_rev_diff: C1W1 | C2W1 | C3W1 | C4W1 | M1 | M2 | M3 | M4 | M5 | M6 | M7 | M8 | R1 | R2 | R3 | R4

set(src_rev_diff: SignalSource, bus=Bus.Default) → None[source]

# BUS<*>:TBTO:RDIF
driver.bus.tbto.rdif.set(src_rev_diff = enums.SignalSource.AJ1, bus = repcap.Bus.Default)

Sets the source of the provided reversed differential signal, if method RsRtx.bus.tbto.rtyp.set() is set to DIFFerential.

Parameters:

src_rev_diff – C1W1 | C2W1 | C3W1 | C4W1 | M1 | M2 | M3 | M4 | M5 | M6 | M7 | M8 | R1 | R2 | R3 | R4
bus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bus’)