Polarity

SCPI Command :

BUS<*>:SPI:SSELect:POLarity

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(bus=Bus.Default) → BusSpiI2cDataPolarity

# BUS<*>:SPI:SSELect:POLarity
value: enums.BusSpiI2cDataPolarity = driver.bus.spi.sselect.polarity.get(bus = repcap.Bus.Default)

Selects whether transmitted slave select signal is high active (high = 1) or low active (low = 1) .

Parameters:

bus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bus’)

Returns:

ss_polarity: ACTLow | ACTHigh

set(ss_polarity: BusSpiI2cDataPolarity, bus=Bus.Default) → None

# BUS<*>:SPI:SSELect:POLarity
driver.bus.spi.sselect.polarity.set(ss_polarity = enums.BusSpiI2cDataPolarity.ACTHigh, bus = repcap.Bus.Default)

Selects whether transmitted slave select signal is high active (high = 1) or low active (low = 1) .

Parameters:

• ss_polarity – ACTLow | ACTHigh

• bus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bus’)