Source

SCPI Command :

BUS<*>:SENT:DATA:SOURce

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(bus=Bus.Default) → SignalSource[source]

# BUS<*>:SENT:DATA:SOURce
value: enums.SignalSource = driver.bus.sent.data.source.get(bus = repcap.Bus.Default)

Selects the source of the data line.

Parameters:: bus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bus’)
Returns:: data_source: C1W1 | C2W1 | C3W1 | C4W1 | M1 | M2 | M3 | M4 | M5 | M6 | M7 | M8 | R1 | R2 | R3 | R4

set(data_source: SignalSource, bus=Bus.Default) → None[source]

# BUS<*>:SENT:DATA:SOURce
driver.bus.sent.data.source.set(data_source = enums.SignalSource.AJ1, bus = repcap.Bus.Default)

Selects the source of the data line.

Parameters:

data_source – C1W1 | C2W1 | C3W1 | C4W1 | M1 | M2 | M3 | M4 | M5 | M6 | M7 | M8 | R1 | R2 | R3 | R4
bus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bus’)