TypePy

SCPI Command :

BUS<*>:RFFE:SEQuence<*>:TYPE
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(bus=Bus.Default, busRffeSequence=BusRffeSequence.Default) → BusRffeSequenceType[source]
# BUS<*>:RFFE:SEQuence<*>:TYPE
value: enums.BusRffeSequenceType = driver.bus.rffe.sequence.typePy.get(bus = repcap.Bus.Default, busRffeSequence = repcap.BusRffeSequence.Default)

Returns the type of the selected command sequence.

Parameters:

  • bus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bus’)

  • busRffeSequence – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Sequence’)

Returns:

type_py: RZWR: Register 0 Write RWR: Register Write RRD: Register Read ERWR: Extended Register Write ERRD: Extended Register Read ERWL: Extended Register Write Long ERRL: Extended Register Read Long MRD: Main Device Read, was MASR until FW 5.35 MWR: Main Device Write, was MASW until FW 5.35 MOHO: Main Device Ownership Handover, was MASOHO until FW 5.35 IRSUM: Interrupt Summary and Notification MSKW: Masked Write MCTR: Main Device Context Transfer Read MCTW: Main Device Context Transfer Write ERRor: The bits defining the command sequence are not valid, no supported command sequence