Technology

SCPI Command :

BUS<*>:LIN:TECHnology

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(bus=Bus.Default) → BusLinTechnology

# BUS<*>:LIN:TECHnology
value: enums.BusLinTechnology = driver.bus.lin.technology.get(bus = repcap.Bus.Default)

Sets the threshold voltage as defined for various signal technologies.

Parameters:

bus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bus’)

Returns:

technology: V15 | V25 | V35 | V6 | V9 | MANual

• V15: 1.5 Volt (TTL)

• V25: 2.5 Volt (CMOS 5.0 V)

• V35 | V6 | V9: 3.5 V (7 V supply) , 6.0 V (12 V supply) , 9.0 V (18 V supply) respectively

• MANual: Manual setting of user-defined values with BUSb:LIN:DATA:THReshold.

set(technology: BusLinTechnology, bus=Bus.Default) → None

# BUS<*>:LIN:TECHnology
driver.bus.lin.technology.set(technology = enums.BusLinTechnology.CUSTom, bus = repcap.Bus.Default)

Sets the threshold voltage as defined for various signal technologies.

Parameters:

• technology –

  V15 | V25 | V35 | V6 | V9 | MANual

  • V15: 1.5 Volt (TTL)

  • V25: 2.5 Volt (CMOS 5.0 V)

  • V35 | V6 | V9: 3.5 V (7 V supply) , 6.0 V (12 V supply) , 9.0 V (18 V supply) respectively

  • MANual: Manual setting of user-defined values with BUSb:LIN:DATA:THReshold.

• bus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bus’)