Rdap

SCPI Command :

BUS<*>:HBTO:RDAP

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(bus=Bus.Default) → SignalSource

# BUS<*>:HBTO:RDAP
value: enums.SignalSource = driver.bus.hbto.rdap.get(bus = repcap.Bus.Default)

Selects the DA+ source of the provided reversed single ended signal, if method RsRtx.bus.hbto.rtyp.set() is set to SINGle.

Parameters:

bus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bus’)

Returns:

src_rev_da_plus: C1W1 | C2W1 | C3W1 | C4W1 | M1 | M2 | M3 | M4 | M5 | M6 | M7 | M8 | R1 | R2 | R3 | R4

set(src_rev_da_plus: SignalSource, bus=Bus.Default) → None

# BUS<*>:HBTO:RDAP
driver.bus.hbto.rdap.set(src_rev_da_plus = enums.SignalSource.AJ1, bus = repcap.Bus.Default)

Selects the DA+ source of the provided reversed single ended signal, if method RsRtx.bus.hbto.rtyp.set() is set to SINGle.

Parameters:

• src_rev_da_plus – C1W1 | C2W1 | C3W1 | C4W1 | M1 | M2 | M3 | M4 | M5 | M6 | M7 | M8 | R1 | R2 | R3 | R4

• bus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bus’)