PrDiff

SCPI Command :

BUS<*>:FLXRay:PRDiff
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(bus=Bus.Default) → BusFlxrayPreset[source]
# BUS<*>:FLXRay:PRDiff
value: enums.BusFlxrayPreset = driver.bus.flxRay.prDiff.get(bus = repcap.Bus.Default)

Selects a default threshold voltage if method RsRtx.bus.flxRay.srcType.set() is set to DIFFerential.

Parameters:

bus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bus’)

Returns:

preset_diff: MV150 | MV200 | MV250 | MV300 | MANual

  • MV150 | MV200 | MV250 | MV300: ±150 mV, ±200 mV, ±250 mV, ±300 mV respectively

  • MANual: Manual setting of user-defined values with BUSb:FLXRay:THResholdn.

set(preset_diff: BusFlxrayPreset, bus=Bus.Default) → None[source]
# BUS<*>:FLXRay:PRDiff
driver.bus.flxRay.prDiff.set(preset_diff = enums.BusFlxrayPreset.MANual, bus = repcap.Bus.Default)

Selects a default threshold voltage if method RsRtx.bus.flxRay.srcType.set() is set to DIFFerential.

Parameters:

  • preset_diff –

    MV150 | MV200 | MV250 | MV300 | MANual

    • MV150 | MV200 | MV250 | MV300: ±150 mV, ±200 mV, ±250 mV, ±300 mV respectively

    • MANual: Manual setting of user-defined values with BUSb:FLXRay:THResholdn.

  • bus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bus’)