Data

SCPI Command :

BUS<*>:CMSB:MANChester:DATA

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(bus=Bus.Default) → SignalSource

# BUS<*>:CMSB:MANChester:DATA
value: enums.SignalSource = driver.bus.cmsb.manchester.data.get(bus = repcap.Bus.Default)

Selects the source channel for the data signal. For triggering on a serial bus, analog channels C1–C4 are required. Otherwise, if no serial bus trigger has been selected, permitted source selections include the mathematical channels and the reference channels .

Parameters:

bus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bus’)

Returns:

source_man_data: C1W1 | C2W1 | C3W1 | C4W1 | M1 | M2 | M3 | M4 | M5 | M6 | M7 | M8 | R1 | R2 | R3 | R4

set(source_man_data: SignalSource, bus=Bus.Default) → None

# BUS<*>:CMSB:MANChester:DATA
driver.bus.cmsb.manchester.data.set(source_man_data = enums.SignalSource.AJ1, bus = repcap.Bus.Default)

Selects the source channel for the data signal. For triggering on a serial bus, analog channels C1–C4 are required. Otherwise, if no serial bus trigger has been selected, permitted source selections include the mathematical channels and the reference channels .

Parameters:

• source_man_data – C1W1 | C2W1 | C3W1 | C4W1 | M1 | M2 | M3 | M4 | M5 | M6 | M7 | M8 | R1 | R2 | R3 | R4

• bus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bus’)