TypePy

SCPI Command :

BUS<*>:CANXl:TYPE

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(bus=Bus.Default) → BusSignalType

# BUS<*>:CANXl:TYPE
value: enums.BusSignalType = driver.bus.canXl.typePy.get(bus = repcap.Bus.Default)

Selects the CAN-High or CAN-Low line. Both lines are required for differential signal transmission used by CAN-XL.

Parameters:

bus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bus’)

Returns:

signal_type: CANL | CANH

set(signal_type: BusSignalType, bus=Bus.Default) → None

# BUS<*>:CANXl:TYPE
driver.bus.canXl.typePy.set(signal_type = enums.BusSignalType.CANH, bus = repcap.Bus.Default)

Selects the CAN-High or CAN-Low line. Both lines are required for differential signal transmission used by CAN-XL.

Parameters:

• signal_type – CANL | CANH

• bus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bus’)