Stop

SCPI Command :

ADVJitter<*>:SIGNal:GATE:RANGe:ABSolute:STOP

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(advJitter=AdvJitter.Default) → float

# ADVJitter<*>:SIGNal:GATE:RANGe:ABSolute:STOP
value: float = driver.advJitter.signal.gate.range.absolute.stop.get(advJitter = repcap.AdvJitter.Default)

Sets the stop time of the gate area in percent, if method RsRtx.advJitter.signal.gate.range.mode.set() is set to ABS.

Parameters:

advJitter – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘AdvJitter’)

set(stop: float, advJitter=AdvJitter.Default) → None

# ADVJitter<*>:SIGNal:GATE:RANGe:ABSolute:STOP
driver.advJitter.signal.gate.range.absolute.stop.set(stop = 1.0, advJitter = repcap.AdvJitter.Default)

Sets the stop time of the gate area in percent, if method RsRtx.advJitter.signal.gate.range.mode.set() is set to ABS.

Parameters:

• stop – -100E+24 to 100E+24

• advJitter – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘AdvJitter’)