Base

SCPI Command :

ADVJitter<*>:RESult:PAMJitter:CONFig:CATegory<*>:MEASurement<*>:BASE
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(advJitter=AdvJitter.Default, category=Category.Default, measurement=Measurement.Default) → PamLevel[source]
# ADVJitter<*>:RESult:PAMJitter:CONFig:CATegory<*>:MEASurement<*>:BASE
value: enums.PamLevel = driver.advJitter.result.pamJitter.config.category.measurement.base.get(advJitter = repcap.AdvJitter.Default, category = repcap.Category.Default, measurement = repcap.Measurement.Default)

Selects the base level. This is the lowest amplitude level used in the modulation. It sets the reference point for the least amount of energy a pulse can carry in the system.

Parameters:

  • advJitter – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘AdvJitter’)

  • category – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Category’)

  • measurement – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)

Returns:

base_level: LEVEL0 | LEVEL1 | LEVEL2 | LEVEL3 | LEVEL4 | LEVEL5 | LEVEL6 | LEVEL7

set(base_level: PamLevel, advJitter=AdvJitter.Default, category=Category.Default, measurement=Measurement.Default) → None[source]
# ADVJitter<*>:RESult:PAMJitter:CONFig:CATegory<*>:MEASurement<*>:BASE
driver.advJitter.result.pamJitter.config.category.measurement.base.set(base_level = enums.PamLevel.LEVEL0, advJitter = repcap.AdvJitter.Default, category = repcap.Category.Default, measurement = repcap.Measurement.Default)

Selects the base level. This is the lowest amplitude level used in the modulation. It sets the reference point for the least amount of energy a pulse can carry in the system.

Parameters:

  • base_level – LEVEL0 | LEVEL1 | LEVEL2 | LEVEL3 | LEVEL4 | LEVEL5 | LEVEL6 | LEVEL7

  • advJitter – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘AdvJitter’)

  • category – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Category’)

  • measurement – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)